AP1690 document number: ds 36469 rev. 2 - 2 1 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product single stage primary side regulation pfc controller for dimmable led driver description the AP1690 is a high performance ac/dc universal input primary side regulation power factor controller for dimmable led driver applications. the AP1690 provides accurate constant current (cc) regulation while removing the opto - coupler and secondary control circuitry. it also eliminates the need of loop compensation circuitry while maintaining stability. the AP1690 achieves excellent regulation and high efficiency, yet meets the requirement of iec61000 - 3 - 2 harmonic standard. the AP1690 features low start - up current, low operation current and high efficiency. it also has rich protection features including over voltage, short circuit, over current, over temperature protection etc. in order to regulate the output current of led current with the phase of dimmer, pin 2 and pin 3 are used to set the peak current of transformer according to the voltage applied to these two pins. the AP1690 is available in so - 8 package. pin assignments ( top view ) ( so - 8 / m package) features ? primary side control for output current regulation without opto - coupler and secondary cv/cc control circuitry ? low start - up current ? good dimmer compatibility ? tight cc regulation performance for universal input mains voltage range ? eliminates control loop compensation circuitry ? built - in acceleration start ? led open protection ? led short circuit protection ? over temperature protection ? over current protection ? cost effective for dimmable led driver solution ? totally lead - free & fully rohs compliant (notes 1 & 2) ? halogen and antimony free. green device (note 3 ) applications ? single stage power factor correction power supply for dimmable led lighting note s: 1 . no purposely added lead. fully eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. typical applications circuit non - isolated v c c d i m p d g n d c s o u t f b l e d + l e d - l n r 1 r 2 c 1 b d 1 z d 1 d 1 c 2 c 3 c 4 l 1 r 4 r 5 r 3 d 2 r 6 c 5 r 7 r 8 c 6 r 9 r 1 0 d 3 r 1 1 r 1 2 r 1 3 r 1 4 c 7 r 1 5 r 1 6 c 8 r 1 7 r 1 8 d 4 q 1 r 1 9 d 5 r 2 0 c 9 + q 2 a p 1 6 9 0 3 2 6 4 7 5 8 1 2 3 4 8 7 6 5 nc pd dim cs fb gnd out vcc
AP1690 document number: ds 36469 rev. 2 - 2 2 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product typical applications circuit (cont . ) isolated pin description s pin number p in name function 1 nc no connection 2 pd the rectified input voltage sensing pin. the pin is detecting the phase of dimmer 3 dim the rectified input voltage sensing pin. the pin is detecting the average ac input voltage 4 cs primary current sensing 5 fb this pin captures the feedback voltage from the auxiliary winding. fb voltage is used to control no load output voltage and determine acceleration stop point at start - up phase 6 gnd ground. current return for gate driver and control circuits of the ic 7 out gate driver output 8 vcc supply voltage of gate driver and control circuits of the ic v c c d i m p d g n d c s o u t f b l n l e d + l e d - r 1 c 1 a p 1 6 9 0 z d 1 b d 1 d 1 l 1 r 2 c 2 r 3 c 3 c 4 r 4 r 5 r 6 c 5 d 2 d 3 r 7 c 6 r 8 r 9 r 1 0 r 1 1 c 7 r 1 2 r 1 3 r 1 4 r 1 5 r 1 6 r 1 7 c 8 c 9 d 4 d 5 r 1 8 r 1 9 r 2 0 q 1 d 6 c 1 0 r 2 1 c y 1 t 1 q 2 + 3 2 6 4 7 5 8
AP1690 document number: ds 36469 rev. 2 - 2 3 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product functional block diagram absolute maximum ratings (note 4 ) symbol parameter rating unit v cc power supply voltage - 0.3 to 30 v i out driver output current 300 ma v pd , v dim , v cs voltage at pd, dim, cs - 0.3 to 7 v v fb fb input voltage - 40 to 10 v t j operating junction temperature + 150 oc t stg storage temperature - 65 to + 150 oc t lead lead temperature (soldering, 10 sec) + 300 oc p d power dissipation at t a = + 50 ? c 0.65 w ja thermal resistance (junction to ambient) 190 ? c/w C esd (machine model) 200 v C esd (human body model) 3000 v note 4 : stresses greater than those listed under absolute maximum ratings may cause permanent damage to the device. these are str ess ratings only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating condi tions is not implied. exposure to absolute maximum ratings for extended periods may affect device reliability. r e g u l a t o r & b i a s o v p t o n s e c d e t e c t o r 0 . 1 v 1 . 8 v p f m t o n s u v l o c o m p e a u v l o p r o c v _ c t r l p f m d r i v e r r q s r q s c c _ c t r l f b c s p d v c c o u t g n d a c c e l e r a t i o n s t a r t c o n t r o l p e a k c u r r e n t c o n t r o l & l e b d i m m i n g c o n t r o l d i m 2 3 4 5 6 7 8
AP1690 document number: ds 36469 rev. 2 - 2 4 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product recommended operating conditions symbol parameter min max unit v cc power supply voltage 9 21 v t a ambient temperature - 40 + 105 oc electrical characteristics (@ v cc = 15v, t a = + 25c, unless otherwise specified .) symbol parameter conditions min typ max unit uvlo section v th (st) start - up threshold C 18 19 20 v v opr (min) minimal operating voltage after turn on 7 8 9 v cc_ovp vcc ovp voltage C 28 32 36 standby current section i st start - up current v cc = v th (st) - 0.5v, before start up C C 100 a i cc (max) maximum operating current v pd = v dim = 3v C 1500 2000 drive output section v oh output high level voltage i gd - source = 20ma v cc = 12v 10 C C v v ol output low level voltage i gd - sink = 20ma v cc = 12v C C 1 v t r output voltage rise time c l = 1nf 100 140 190 ns t f output voltage fall time c l = 1nf 30 60 90 ns v o - clamp output clamp voltage i gd - source = 5ma v cc = 20v 12 13.5 15 v current sense section t on (min) minimum on time C 500 750 1000 ns v socp short circuit protection voltage C 3 4 C v feedback input section i fb fb pin input leakage current v fb = 4v C 2 8 a v fb (acc) acceleration start threshold C 1.4 1.8 2.2 v v fb (ovp) over voltage protection C 4.5 6 7.5 v dimming section v in pd pin and d im pin input voltage range C C 3 6 v
AP1690 document number: ds 36469 rev. 2 - 2 5 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product performance characteristics supply current vs. supply voltage output clamp voltage vs. supply voltage start - up voltage v s. ambient temperature minimal operating voltage v s. ambient temperature start - up current v s. ambient temperature operating current v s . ambient temperature 0 5 10 15 20 25 30 0 100 200 300 400 500 600 700 800 900 1000 1100 supply current ( ? a) supply voltage (v) 8 10 12 14 16 18 20 22 24 26 28 30 5 6 7 8 9 10 11 12 13 14 output clamp voltage (v) supply voltage (v) -40 -20 0 20 40 60 80 100 120 18.0 18.2 18.4 18.6 18.8 19.0 19.2 19.4 start-up voltage (v) ambient temperature ( o c) -40 -20 0 20 40 60 80 100 120 7.8 7.9 8.0 8.1 8.2 8.3 minimal operating voltage (v) ambient temperature ( o c) -40 -20 0 20 40 60 80 100 120 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 start-up current ( ? a) ambient temperature ( o c) -40 -20 0 20 40 60 80 100 120 800 850 900 950 1000 1050 operating current ( ? a) ambient temperature ( o c)
AP1690 document number: ds 36469 rev. 2 - 2 6 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product performance characteristics (cont.) fb input leakage current v s. ambient temperature ordering information diodes ics pb - free products with "g1" suffix in the part number, are rohs compliant and green . package temperature range part number marking id packing so - 8 - 40 to + 105 ? c AP1690mtr - g1 1690m - g1 4 000/13 tape & reel mark ing informatio n (top view) 1690 m - g1 ywwaxx first and s econd l ines: logo and marking id (see ordering information) third l ine: date code y: y ear ww: w ork w eek of m olding a: a ssembly h ouse c ode xx: 7 th and 8 th d igits of batch no . a p 1 6 9 0 x x x C p a c k i n g p a c k a g e p r o d u c t n a m e t r : t a p e & r e e l m : s o - 8 g 1 : g r e e n r o h s / g r e e n -40 -20 0 20 40 60 80 100 120 1.0 1.5 2.0 2.5 3.0 fb input leakage current ( ? a) ambient temperature ( o c)
AP1690 document number: ds 36469 rev. 2 - 2 7 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product package outline dimensions (all d imensions in mm ( inch ) . ) (1) package type: so - 8 0 8 1 7 r 0 . 1 5 0 ( 0 . 0 0 6 ) r 0 . 1 5 0 ( 0 . 0 0 6 ) 1 . 0 0 0 ( 0 . 0 3 9 ) 0 . 3 0 0 ( 0 . 0 1 2 ) 0 . 5 1 0 ( 0 . 0 2 0 ) 1 . 3 5 0 ( 0 . 0 5 3 ) 1 . 7 5 0 ( 0 . 0 6 9 ) 0 . 1 0 0 ( 0 . 0 0 4 ) 0 . 3 0 0 ( 0 . 0 1 2 ) 3 . 8 0 0 ( 0 . 1 5 0 ) 4 . 0 0 0 ( 0 . 1 5 7 ) 7 7 2 0 : 1 d 1 . 2 7 0 ( 0 . 0 5 0 ) t y p 0 . 1 5 0 ( 0 . 0 0 6 ) 0 . 2 5 0 ( 0 . 0 1 0 ) 8 d 5 . 8 0 0 ( 0 . 2 2 8 ) 6 . 2 0 0 ( 0 . 2 4 4 ) 0 . 6 0 0 ( 0 . 0 2 4 ) 0 . 7 2 5 ( 0 . 0 2 9 ) 0 . 3 2 0 ( 0 . 0 1 3 ) 8 0 . 4 5 0 ( 0 . 0 1 7 ) 0 . 8 2 0 ( 0 . 0 3 2 ) 4 . 7 0 0 ( 0 . 1 8 5 ) 5 . 1 0 0 ( 0 . 2 0 1 ) n o t e : e j e c t h o l e , o r i e n t e d h o l e a n d m o l d m a r k i s o p t i o n a l . o p t i o n 1 o p t i o n 1 o p t i o n 2 0 . 3 5 0 ( 0 . 0 1 4 ) t y p t y p t y p 9 ~ 9 ~
AP1690 document number: ds 36469 rev. 2 - 2 8 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product suggested pad layout (1) package type: so - 8 dimensions z (mm)/(inch) g (mm)/(inch) x (mm)/(inch) y (mm)/(inch) e (mm)/(inch) value 6.900/0.272 3.900/0.154 0.650/0.026 1.500/0.059 1.270/0.050 g r i d p l a c e m e n t c o u r t y a r d z g y e x
AP1690 document number: ds 36469 rev. 2 - 2 9 of 9 www.diodes.com may 2014 ? diodes incorporated AP1690 a product line of diodes incorporated new product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any juris diction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. diodes incorporated does not a ssume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this do cument or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. dio des incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorize d sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, cust omers shall indemnify and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or un authorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign tr ademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are specifically not authorized for use as critical components in life support devices or systems without the expres s written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to re sult in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or ef fectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - re lated requirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorpo rated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 4 , diodes incor porated www.diodes.com
|
